| PRESS DATA (OTR BOM) |
| Press load per mold position | 2,200,000 lbs. |
| Shield/Dome inside diameter | 87.5" |
| Daylight Opening | 42" max. - 24" min. |
| Max green tire height | 63" |
| Max internal pressure (with 100 psi in dome) | 400 psi with 81" O.D. Tire |
| Bead diameter range- standard | 32" - 46" |
| Center Mechanism - size and type | 7" or 95" Double Acting |
| Bead lift cylinder | 32.5" Lift
16" dia. x 18 stroke |
| Stripping force (theoretical @250 psi.) | 22,000 lbs. Max. |
| Recommended max top-half mold weight | 20,000 lbs. (segmented)
9,000 lbs. (standard) |
| Unloader - Model and Type | Stripping Arms - Hydraulic |
| Unloading clearance | Front unload |
| Loader - Model and Type | 91" L-3 Hydraulic |
| Approximate bare press weight | 148,000 lbs. |
| Tireholder | None |
| Opening or closing time | 92 seconds |
Note: Side Plate Press:
- Single drive
- Access to maintenance of drive and lift cylinder
- Low operating height - segmented mold actuating cylinder inside of top link
- Stripping mechanism at rear of dome
- Crank gear with shrink fit throw trunnion
|
| Due to the continuous research and improvement program, data presented is subject to change without notice. |
